Race Tech FRONT SPRING KITS - SPORT and RACE
SKU
QFSK-115
Views: 0
£0.00
£0.00
Note: In some cases please allow 3 up to 6 weeks for delivery time. Please contact us to confirm stock and availability
* Sport Series (P200)
- Sport Series refers to our preloaded setup. Sport Series puts the ride height close to stock. This is usually, but not always, a dual spring setup. Typical applications for Sport Series include, but are not limited to, desert racing and recreational riding where maximum active travel and ground clearance are required.
* Race Series (P300)
- Race Series refers to our NPL (no-preload) setup. Race Series allows the ATV to sit lower than stock without sacrificing wheel travel. Ride height is fully adjustable to compensate for various track conditions. This is most commonly a triple rate setup. Typical applications for the Race Series include, but are not limited to, motocross and cross-country racing where a low center-of-gravity and high cornering speed are required.
* NOTE: Front and rear must match. i.e. If you have Race Series on the front you must use it on the back as well. If you are only changing one end – choose Sport.
* Front Kits contain all necessary Springs and Hardware including an assortment of crossover rings for custom tuning where applicable. Instructions give a detailed explanation. Some Kits require disassembly of the shock or minor filing for installation.
* Main Spring color is not guaranteed. Secondary (tender) springs are Black.
- Sport Series refers to our preloaded setup. Sport Series puts the ride height close to stock. This is usually, but not always, a dual spring setup. Typical applications for Sport Series include, but are not limited to, desert racing and recreational riding where maximum active travel and ground clearance are required.
* Race Series (P300)
- Race Series refers to our NPL (no-preload) setup. Race Series allows the ATV to sit lower than stock without sacrificing wheel travel. Ride height is fully adjustable to compensate for various track conditions. This is most commonly a triple rate setup. Typical applications for the Race Series include, but are not limited to, motocross and cross-country racing where a low center-of-gravity and high cornering speed are required.
* NOTE: Front and rear must match. i.e. If you have Race Series on the front you must use it on the back as well. If you are only changing one end – choose Sport.
* Front Kits contain all necessary Springs and Hardware including an assortment of crossover rings for custom tuning where applicable. Instructions give a detailed explanation. Some Kits require disassembly of the shock or minor filing for installation.
* Main Spring color is not guaranteed. Secondary (tender) springs are Black.
| Product Type: | SPRING |
|---|
TW Suspension Tech are a fully approved Race Tech Centre and supply & install the full range of Race Tech Suspension products. Race Tech Suspension has over 36 years of creating hi-performance suspension solutions for motorcycles, ATVs, UTVs, and snowmobiles. RT specializes in revalving stock suspension components using proven Gold Valve Kits that can be user or dealer installed.
To find out the parts required for your application please visit https://racetech.com/